#openmoko
31 December 2007
Total 5 pages. You are browsing page 1/5.
First :: Prev :: [1] [2] [3] [4] [5] [...] :: Next :: Last
--- Log opened Mon Dec 31 00:00:01 2007
03:49 <****> Five new NSLU2 firmware releases now available: http://article.gmane.org/gmane.comp.misc.nslu2.linux/20642
03:50 <****> (The NSLU2 is a good device to use as a bluetooth access point, or dfu-util flasher, or usb-networking device for the Neo1973)
05:02 <****> Hello Everybody
05:02 <****> I need serious help
05:03 <****> We are in the process of dropping openmoko based application development if we didn't get a useful reply from you people
05:04 <****> Please help
05:04 <****> Hmm
05:04 <****> That's a logical impossibility
05:05 <****> You can't be in the process of doing something based on a condition that hasn't occurred yet
05:05 <****> Building Openmoko is really really painful task
05:05 <****> Unless you've discovered time travel
05:05 <****> Have you?
05:06 <****> Is it possible to bypass the build process?
05:07 <****> I don't think there's a binary release anywhere yet
05:07 <****> Or is it possible bypass downloading,
05:08 <****> make flash-qemu-official run-qemu
05:08 <****> Or is it possible bypass downloading, -- what?
05:08 <****> rwhitby: what that command do?
05:08 <****> raddy: BTW, threats like that don't do much in the open source world.
05:09 <****> You want to install some software without downloading it? :-\
05:09 <****> raddy: it runs the openmoko emulator with the latest official binary image
05:11 <****> Twey : nope, we have fast internet connection in our server, but we are going build openmoko only in a laptop, is possible to download "ALL" needed stuff using our server and move the downloaded stuff to our laptop and start compiling from there?
05:12 <****> rwhitby: FYI : i am not threating, we just lost so much man hours even for seting up openmoko build environment
05:13 <****> raddy: there is a new binary SDK that's only just come out - I don't know how to use it.
05:14 <****> rwhitby : ohh, where is it?
05:15 <****> http://downloads.openmoko.org/toolchains/
05:16 <****> Niiice.
05:16 <****> That's a good start.
05:17 <****> rwhitby : wowwww
05:20 <****> rwhitby : greattttttttttttttttttttttt
05:28 <****> Hello Everybody
05:29 <****> For using Openmoko Toolchain, do i need to have any specific version of openmoko distribution in my phone?
06:27 <****> Hi, ?? Please Which files should I put on the SD card so I can boot from it?
06:40 <****> Hi again, sorry for asking a silly question, I am reading wiki/Booting_from_SD so will keep trying a while by myself.
06:41 <****> Problem is I managed to cause the Neo to forget it can read a card type ext2
06:48 <****> that toolchain is missing bluetooth
06:54 <****> although it is quite able to mke2fs and thus format the card as ext2 - then unable to recognise it.
06:54 <****> I don't have a working Makefile setup currently.
08:20 <****> cm, I face this problem have a look on it. http://pastebin.ca/839841
08:21 <****> cm, any idea
08:51 <****> atul_1: google zlib-1.2.3.tar.bz2 , download it , put it into sources directory and rerun
08:51 <****> ;P
08:51 <****> atul_1: Resolving www.zlib.net... 0.0.0.0 ??? try to check your resolver ;P
08:55 <****> Ninex, ok am trying and back to you. thx
08:56 <****> clare: ext3 !! not ext2 ;P
08:57 <****> Ninex, can you tell me the exact dierectory where to put this zlib-1.2.3.tar.bz2
08:59 <****> subdirectory named sources in the same directory where you have putted Makefile
09:00 <****> aa ant you need to make stamp file
09:00 <****> touch build/tmp/stamps/armv4t-angstrom-linux-gnueabi/zlib-1.2.3-r2.do_fetch
09:01 <****> s/ant/and/
09:01 <****> then rerun process
09:03 <****> Ninext, I think actual in site have it is in maintains it wont allow me to download it says page not found
09:15 <****> NineX, I have found out a lot since earlier. THe problem of losing the dvice altogether is solved.
09:16 <****> It seems to have been due to using the new uImage at kernel 2.6.23 without at the same time having
09:16 <****> matching modules etc. I have redone the /media/card and am putting the files in there againt o try to load them
09:18 <****> meantime the failure of normal botting with the printing mixed over the logo has gone away.
09:18 <****> more later,
09:34 <****> clare: ?
09:38 <****> NineX, Hi, I tried again to boot from SD, but it sends and error message which went by even faster than
09:39 <****> before I have no chance of reading it. Are such messages findable in the Neo anywhere?
09:39 <****> nope
09:39 <****> hehe
09:40 <****> what sd card are you using, what version of u-boot
09:40 <****> clare: do you tryed with u-boot taken froma buildhost.automated.it ? http://buildhost.automated.it/u-boot-good-for-sd-boot-r13_0_2632_0.bin
09:41 <****> SD card came with the machine 450M size. I did earlier, I can go back to that if it is really good,
09:41 <****> I will let you know the result
09:42 <****> clare: tehere are u-boot issues . the last known u-boot version that corectly boot from SD are -r13_0_ 2632_0
09:48 <****> ERROR: No providers of build target u-boot-openmoko (for [])
09:48 <****> ^^^ wtf?
09:48 <****> i am booting from SD .. it works well, onc eyou get the right uboot on there. i bricked a neo trying so ..
09:49 <****> NineX, Well, progress of a sort, it send a message and then went on to try and boot.
09:49 <****> It is in Panic, it gave a list of partitions then said No filesystem could mount root,
09:50 <****> clare: connect your debugboard to get acces serial console... then you sholud have full output from your kernel
09:50 <****> tried ext3, cramfs, romfs. ..Hmm I can try ext3 if Neo can wite it.
09:50 <****> clare: so you have somethink fucked up with kernel and/or boot commandline ;P
09:50 <****> I dont have a debug board..
09:51 <****> show me your u-boot-env
09:51 <****> sorry i dont understand the question
09:52 <****> clare: printenv from u-boot comandline
09:53 <****> eh? where is the commandline?
09:55 <****> final message from kernel was:VFS:Unable to mount root fs on unknown-block(179,1)
09:56 <****> What I would like to know is whether I have the right things on the card supposing this were fixed.
09:57 <****> What I did was untar the qtopia tar.bz2 and put all the files on /media/card and then put the
09:57 <****> clare: RTFM
09:57 <****> uImage file in its =directory boot. Oddly it had in there already a link to uImage 2.6.23 but the lib/modules were
09:58 <****> clare: turnoff your phone
09:58 <****> press end holed aux button
09:58 <****> 2.6.22, so I put in a uImage of 2.6.22
09:58 <****> press power button tu show menu
09:58 <****> connect your phone to POC host via usb cable
09:58 <****> s/POC/PC/
09:58 <****> NineX meant: connect your phone to PC host via usb cable
09:59 <****> yes I do that
09:59 <****> on host computer put cu -l /dev/ttyACM0
09:59 <****> you sholud have connection to u-boot command line
09:59 <****> put printenv
09:59 <****> end use pastebin.ca
10:00 <****> when I do the cu, is that on the normal PC or is it already logged in to the Neo?
10:01 <****> no cu is a terminal emulator
Total 5 pages. You are browsing page 1/5.
First :: Prev :: [1] [2] [3] [4] [5] [...] :: Next :: Last